NTC Type JB Oven Sensor

Glass-encapsulated thermistor housed in a stainless steel probe body with PTFE leadout wires, terminated with a connector assembly.

NTC Type JD Fast Response Sensor
NTC thermistor assembly in a metal housing with flying wires.

NTC Interchangeable Type 95 Series
Epoxy-coated, NTC interchangeable thermistor chips with bare tinned-copper lead wires.

Mid-Temperature Range Probe
This probe works in a variety of temperature applications in the appliance and industrial segment.

NTC Thermistors - Assemblies

Combine the best features of our thermistors in a custom assembly.

NTC Thermistors - Epoxy

Epoxy coated thermistors offer good stability and robustness.

NTC Thermistors - Glass

We offer a wide range of hermetically sealed glass thermistors.

NTC Thermistors - Radial lead

Radial leaded NTC Thermistors offer wide resistance, beta and dimensional image.

NTC Thermistors 
Surface mount devices. Choose from a wide selection of resistances and beta values.

This thermopile sensor is used for non-contact surface temperature measuring.

ZTP-135D-G13 CO2 Detector
NDIR detectors are simple optical devices often used for gas analysis.

ZTP-25ASM IR Model
This model provides the temperature compensated quad outputs via two control signals with silicon optical lens.

ZTP-015 IR Sensor
This thermopile sensor is used for non-contact surface temperature measuring.

ZTP-135SR-G3 CO2 Detector
NDIR detectors are simple optical devices often used for gas analysis.

ZTP-315D1- IR Sensor
This thermopile sensor is used for non-contact surface temperature measuring.

NTC Inrush Current Limiter - Thermistors
Disc thermistor with uninsulated lead-wires.

MA400X Fully Autoclavable Temperature Probes
The MA400X Series has been designed for Steam Autoclave Sterilization temperatures up to 273.

NTC Type A990 Series Thermistors
Interchangeable sub-assemblies consisting of matched pairs of glass encapsulated thermistor beads connected in series or parallel circuit configurations.

MA700 Series Temperature Probes
These reusable temperature probes are ideally suited for the critical sensing parameters in continuous monitoring of a patient’s body temperature.

M1000
Adhesive Mounted Surface Sensors
Features a surface mount cup for use as skin sensors or on flat surfaces.

Types S/AS/ES NTC Standards
Ultra-stable thermistor probes assembled into thin wall stainless steel housings with shielded extension leads.

NTC Type AB6

NTC Type AB6 thermistor assemblies consist of small GC or Thermobeads that are welded to insulated extension leads.

NTC MA Biomedical Chip Thermistors
These biomedical chip thermistors are designed for use in catheter assemblies.

Type CSP Temperature Standards
The Type CSP Temperature Standards are ultrastable probe thermistors which have been calibrated to an accuracy of 0.01°C.

Type PRE/K
Glass-encapsulated thermistor housed in a stainless steel probe body with PTFE leadout wires, terminated with a connector assembly.

Type YQ Series
This series includes a range of RoHS-Compliant PTC thermistors.

Type KY2 & KY3 NTC Thermistors
These contain one PTC and two NTC thermistor elements connected inside a plastic sleeve and encapsulated in a brass probe housing.

Active Incar Sensor
This sensor indicates the cabin temperature of the fully automated temperature control system in a passenger car.

NTC Thermistors: TYPE KU/UD 20 Unleaded Disc
A range of unleaded disc thermistors.

Air Quality Sensor

This sensor monitors the air coming into a vehicle.

Dual Solar Sensor
The dual solar sensor uses two photo diode cells inside of it to measure the intensity of the light that enters into the cabin of a vehicle.

Oil Pressure Switch
The oil pressure switch monitors the engine oil flow when the engine starts.

Duct Sensor Thermometrics Sensor
This sensor measures the temperature inside the air duct of air conditioner systems.

S/AS/ES Precision NTC Standards
Our temperature standards consist of ultra-stable thermistor probes assembled into thin wall stainless steel housings with shielded extension leads.

Ambient Sensor
This sensor measures the temperature outside the passenger compartment and is usually mounted inside or near the front bumper.

E-stat Controller - Controller
The E-stat controller is used to prevent the evaporator core from freezing.

Water Temperature Sensor
The Water temperature sensor indicates the ambient temperature of the automatic air conditioner system in the passenger car.

Single Solar Sensor
The single solar sensor uses outside sunlight coming into the vehicle to help control the vehicle’s HVAC system.